Our Machine Vision Cameras

High resolution, high speed, award winning camera family - from 5MP to 31MP

The award winning Oryx 10GigE camera family allows systems designers to take advantage of the latest sensors by supporting transfer speeds up to 10Gbit/s enabling the capture of 4K resolution, 12-bit images at over 60FPS. Oryx’s 10GBASE-T interface is a proven and widely deployed standard that provides reliable image transfer at cable lengths over 50 meters on inexpensive CAT6A, or greater than 30 m on CAT5e. On-camera features including IEEE1588 clock synchronization and full compatibility with popular third-party software supporting GigE Vision, gives system designers the tools to quickly develop innovative solutions.

Ice cube format, powerful results and USB3.1 Gen 1 speed

The Blackfly S leverages the newest CMOS image sensor innovations with the most advanced GeniCam features, programmed with the new intuitive Spinnaker software development kit. The USB3.1 Gen1 interface is perfect for users requiring high data throughput with resolutions from 0.4 Megapixel to 20 Megapixel. Users can benefit from advanced camera controls and programmable logic using sequencer, chunk data, event notifications, counters, timers and logic blocks and a hassle-free 3-year warranty.

Ice cube format, powerful results and GigE benefits

The Blackfly S leverages the newest CMOS image sensor innovations with the most advanced GeniCam features, programmed with the new intuitive Spinnaker software development kit. The GigE version is perfect for users requiring long extension cables or IEEE1588 Precision Time Protocol synchronisation with resolutions from 0.4 Megapixel to 5 Megapixel. Users can benefit from advanced camera controls and programmable logic using sequencer, chunk data, event notifications, counters, timers and logic blocks and a hassle-free 3-year guarantee.

-

The FLIR Blackfly Board Level USB variants are high performance, machine vision, area scan cameras designed for embedding into tight spaces. Unlike many board level cameras, it boasts a rich feature set applied to the latest CMOS sensors; the same feature set as the cased version. It is ready for integration with proven compatibility with popular SBCs and SOMs. The Blackfly S board level models enable OEMs to develop smaller, lighter, and lower cost solutions with embedded system connectivity and rich features. For more specification on this product, please download the Datasheet.

-

The FLIR Blackfly Board Level GigE variants are high performance, machine vision, area scan cameras designed for embedding into tight spaces. Unlike many board level cameras, it boasts a rich feature set applied to the latest CMOS sensors; the same feature set as the cased version. It is ready for integration with proven compatibility with popular SBCs and SOMs. The Blackfly S board level models enable OEMs to develop smaller, lighter, and lower cost solutions with embedded system connectivity and rich features. For more specification on this product, please download the Datasheet.

Unbeatable value in an ultra-compact form factor

The Blackfly combines the throughput of USB 3.1 Gen1, highly sensitive sensors, industry-leading affordability, and a host of unique features for uncompromising value, ranging from 0.3 Megapixel to 5 Megapixel resolutions. The Blackfly offers a hassle-free 3-year warranty.

Unbeatable value in an ultra-compact form factor

The Blackfly camera line combines Power over Ethernet, industry-leading affordability and a host of unique features for uncompromising value, with resolutions ranging from 0.3 Megapixel to 5 Megapixel. The Blackfly combines performance and reliability, including a 16MByte frame buffer and a hassle-free 3-year warranty.

Tomorrow's Tech in Today's Camera

Deep learning is a powerful tool for system designers to quickly automate complex and subjective decision making and deliver higher quality products and improved productivity. Deploy your trained neural network to the FLIR Firefly DL with Neuro technology and reduce system cost and complexity by making decisions on-camera without host PC. With its very small size, low weight and power consumption, the Firefly DL camera is ideal for embedding into mobile, desktop, and handheld systems. For more specifications on this product, please download our datasheet.

Big Results. Small Footprint.

The FLIR Fire?y® S delivers the essential machine vision features you need in an ultra-compact body. Its small size, low power, and light weight make it ideal for embedding into portable devices. The Firefly S provides amazing value by combining powerful on-camera features with the latest CMOS sensors. For more specifications on this product, please download our Datasheet.

Flexible form factor with USB3 vision

The Chameleon3 combines the ease-of-use of USB3.1 Gen1, a small size and the flexibility of choice between a lightweight housed camera or a board level camera with different lens mounts. The Chameleon is designed for reliability with frame buffer image retransmission an opto-isolated GPIO with locking connection and a hassle-free 3-year warranty, with resolutions ranging from 1.3 Megapixel to 5 Megapixel.

High speed with high performance sensors

The high performance Grasshopper3 camera line combines the benefits of CCD with the affordability and data throughput of USB 3.0. Its FPGA and frame buffer-based architecture provides optimal reliability, a rich set of features, and a full image processing pipeline including colour interpolation, gamma, and lookup table functionality. The resolutions offered range from 1.4 Megapixel to 12.3 Megapixel.

High performance CCD and CMOS sensors

The Grasshopper3 GigE POE camera line combines large format, high resolution, CCD and CMOS sensors, with the flexible capabilities of GigE Vision and Power over Ethernet for optimal imaging performance and long cable length, with resolutions ranging from 1.4 Megapixel to 12.3 Megapixel.

Ultra-compact, ultra-fast CMOS

The Flea3 cameras offer the fastest CMOS sensors in an ultra-compact, low-cost package, ensuring reliable high speed framerate delivery with its on-board 32Mbytes frame buffer, with resolutions ranging from 1.3 Megapixel to 12 Megapixel.

World’s smallest GigE camera

The Flea3 cameras offer the fastest CMOS sensors in an ultra-compact, low-cost package, ensuring reliable high speed framerate delivery with its on-board 32Mbytes frame buffer, with resolutions ranging from 1.3 Megapixel to 12 Megapixel.

High-bandwidth imaging at 5x the speed of Gigabit Ethernet

Atlas is a GigE Vision and GenICam compliant camera capable of 600MB/s data transfer rates (5Gbps), allowing for high resolutions and frame rates over standard copper Ethernet cables up to 100meters. It features a TFL lens mount (M35) that is easily adaptable to F-mount and Active Sensor Alignment for superior optical performance. Designed for industrial applications such as factory automation and inspection, autonomous robotics, logistics, food and beverage, medical, biometrics and more. Take a look at the datasheet below for more information on our range of Lucid cameras.

Stunning Imaging at Speeds of up to 1.2GB/S

The perfect combination is coming - fast 10 Gigabit Ethernet with Power over Ethernet (POE) paired with Sony's 4th generation Pregius S CMOS sensors, the Atlas10 improves simplicity and brings performance for high speed applications to new levels. All Atlas10 cameras are actively sensor aligned for maximum optical performance. The first Atlas10 model will feature the 24.5 MP Sony Pregius S IMX530 global shutter CMOS sensor. Atlas 10 is capable of data transfer rates of over 1.1GB per second. Its large format allows for higher resolutions and higher frame rates over standard Ethernet cables up to 100 meters. The Atlas models are equipped with a TFL or C-mount with actively aligned sensors for superior optical performance. For more information on Atlas 10, click on the datasheet below.

The New Industrial Standard

Active sensor alignment for superior optical performance. Lightweight and compact 29 x 29mm size. GigE Vision and GenICam compliant PoE. A machine vision camera truly designed for all industrial environments, Triton offers exceptional price performance and IP67 protection. For more information on the Triton range, take a look at the datasheet below.

Discover the compact, transformable Phoenix camera

Phoenix is a flexible GigE PoE camera module designed for easy OEM integration. With a wide selection of sensors from 0.4MP to 20MP, 4 lens mounts, 3 camera orientations and 3 interface connector options, this camera is truly adaptable for almost any machine vision requirement. Take a look at the datasheet below for more information on our range of Lucid cameras.

LingLog technology for extraordinary Dynamic Range

The HD1 series are optimised for applications that require a High Dynamic Range and excellent Signal to Noise ratios. The cameras allow the user to set up to 512 different regions of interest to guarantee optimum results when areas with different brightness need to be inspected. The cameras are offered with different interfaces like GigE and Camera Link. Take a look at the datasheet below for more information on the HD1 from Photon Focus.

Compact camera series with high FPGA resources

The cameras use the PYTHON5000 CMOS image sensors, targeting low-light and high speed applications with exposure times in the µs with an enhanced Near Infrared version of the sensor also available. The camera leverages a FPGA with high resources that can be tailored to specific customer requirements. Take a look at the datasheet below for more information on the MV0 from Photon Focus.

High speed with global shutter sensors and Gigabit Ethernet

The DR1 series use Double Rate technology to leverage double bandwidth data transmission via the standard GigE Vision interface, being compatible with any existing GeniCam application. The Dual Rate camera is 25% faster than standard Camera Link cameras and 2 times faster than standard GigE cameras. Take a look at the datasheet below for more information on the MV1 from Photon Focus.

Full HD resolution at 170 fps over a single Gigabit Ethernet link

The QR1 series use Quad Rate technology to leverage quadruple bandwidth data transmission via the standard GigE Vision interface, being compatible with any existing GeniCam application. The Quad Rate camera is 14% faster than conventional USB3 cameras and 4 times faster than standard GigE cameras. Take a look at the datasheet below for more information on the QR1 from Photon Focus.

InGaAs camera for SWIR applications

The camera is suited for demanding applications in industrial image processing in the spectral range from 900 to 1700nm, using a Sofradir SNAKE InGaAs image sensor with CMOS read out. GigE and Camera Link interfaces are available. Take a look at the datasheet below for more information on the MV3 from Photon Focus.

-

Using the IMEC mosaic sensor, the cameras can output a hypercube containing detailed information of different wavelengths for the object inspected. The spectral information available varies from 470 nm to 1000nm, with Line Scan and Area Scan options available. Take a look at the datasheet below for more information on the MV1-HS from Photon Focus.

-

The CMOS camera MV4 was developed for advanced machine vision applications, motion analysis and demanding applications of optical metrology. The LUXIMA LUX1310 CMOS image sensor is optimized for high speed applications and is combined in this camera with an advanced feature set to reduce the amount of data inside the camera. Camera series designed for ambitious applications and custom specific system solutions, wide line-up on global shutter image sensors ranging from Ultra Low-Light to HDR CMOS sensors. Take a look at the datasheet below for more information on the MV4 from Photon Focus.

Superb 4K image quality with global shutter technology

Featuring a Sony IMX255 and CIS’s ClairVu Image Signal Processing Technology, the VCC-4K2 will ensure better-than-real image quality for the most demanding applications. The 4K2 features 4K60p output with GenLock functionality and Quad 3G-SDI interface.

Leading the way in image quality for Point of View (POV) mini cameras

The VCC-HD3 takes the features available on the VCC-HD1X to the next level by adding a superb Sony IMX265 Global Shutter sensor with a compact 1/1.8 inch size that will support a broad range of ultra-wide angle lenses. The global shutter sensor makes it the perfect choice for specialist applications that require outstanding image quality in all kind of moving environments. The VCC-HD3 features 1080p Full HD 60p output with GenLock functionality and 3G-SDI interface.

Compact minicam with superb image quality

The VCC-HD1X features 1080p Full HD 60p output with GenLock functionality and a 3G-SDI interface, Using CIS’s ClairVu Image Signal Processing technology, the VCC-HD1X ensures superb image quality transmission without compression via a coaxial cable. The camera is available in a compact housing or as a board level solution. Extra functionalities include auto exposure detection, auto white balance, colour correction, edge enhancement, variable gamma and 3D noise reduction.

Compact minicam with zoom and great image quality

The VCC-HD10ZM features 1080p Full HD 60p output with GenLock functionality, a 3G-SDI interface and 18x Zoom functionality. It uses CIS’s ClairVU ISP technology to ensure optimal image quality across all the zoom range. The camera is available in a compact housing or as a board level solution. Extra functionalities include auto exposure detection, auto white balance, colour correction, edge enhancement, variable gamma and 3D noise reduction.

Seeing in the dark

The VCC-HD1000 features Canon’s Full-Frame Ultra Low-Light sensor and adds CIS’s ClairVu Image Signal Processing Technology to be able to capture clear and crisp images with very poor lighting conditions up to 0.0005 lux. The VCC-HD1000 outputs 1080p Full HF65D 60p and will be the best choice for high end surveillance or wildlife documentaries.

Featuring a CoaXPress interface, the VCC-CXP series provide a great performance supporting a wide range of speed and resolutions, supporting all the product family of Python sensors from 0.3 Megapixel to 25 Megapixel and Canon’s latest 120 Megapixel sensor.

-

Using Camera Link interface, the VCC-VCL series cover a broad range of resolutions and sensors, from the fastest Python and CMOSIS sensors to the latest Sony Pregius Generation 2. Resolutions available range from 0.3 Megapixel to 25 Megapixel.

-

The VCC-10P series is aimed to fulfil the demands of the most challenging applications requiring ultra-high-speed recording. The camera uses an Optical Link interface and can achieve up to 1077fps at 1 Megapixel resolution.

Powerful, Optimisable USB3.0 Vision from NET

The 3iCube USB 3.0 camera series offers a wide range of different models to meet the diverse needs of the machine vision market. Featuring the widely compatible USB 3.0 interface, 3iCube cameras come in robust housing versions consistent with industry standards, board-level versions that can be integrated into the customer application and, on request, customised versions for niche applications. The interfaces offer just as much freedom of choice. 3iCube with USB 3.0 interface comes with a NET driver and NET-developed GenICam / GenTL-compatible software interface SynView. 3iCube is also available with the user-friendly UVC (USB Video Class) interface. It is fully suitable for industrial use and runs under the standard operating systems Windows and Linux and, on request, Macintosh. For more information on the 3iCube series, click on the datasheet below.

Versatile Machine Vision Cameras

The iCube camera series features a USB 2.0 interface for easy integration into industrial and medical applications. Users can choose from a wide range of available models with color and monochrome CMOS image sensors. The board-level version for accommodating compact S-Mount/M12 lenses is particularly suited for integration into OEM products. A single connection to a notebook, PC or embedded PC is all you need for both image transmission and power supply. iControl, the included viewer software, enables fast implementation of the camera, direct access and total control of all crucial camera parameters. For more information on the iCube series, click on the datasheet below.

The Open FPGA solution

GigEPRO cameras feature advanced real-time image processing functionality and full GigE Vision compatibility. The programmable FPGA allows the user to customise the camera with proprietary algorithms, perfect for a range of niche vision applications. GigEPRO promises real-time image processing with the footprint of a compact GigE vision camera. By processing algorithms in the camera, the amount of transferred data can be considerably reduced, meaning that applications are virtually unaffected by bandwidth restrictions. Vision solutions featuring camera-integrated image processing at sensor speed offer major advantages in terms of efficiency as opposed to conventional PC-based vision architectures. With GigEPRO, multi-camera systems that have already reached their technological or economic limits are now a tangible – and scalable – reality. For more information about the GigEPRO series, click on the datasheet below.

High Speed CMOS Cameras

If you're looking for a camera with ultra high resolution, lightning speeds, and fantastic usability, look no further. Featuring CMOS sensors and available in a plethora of configurations, the VC camera series is built for a wide array of machine vision applications, offering high resolution up to 151 megapixels and high speed up to 337.6 fps. A high-speed camera with Camera Link and CoaXpress interface options, the VC Series also provides both global shutter and rolling shutter capabilites. For more information on the VC Series, click on the datasheet below.

Ultra High Resolution Pixel Shifting Cameras

Vieworks' proprietary pixel shift technology delivers ultra-high resolution that surpasses the physical limitations of the sensor in diverse machine vision applications. Furthermore, the resolution of the sensor can be extended from 4x up to 9x without additional equipment, making this a truly special series of cameras. Adopted by major FPD manufacturers, performance and reliability of Vieworks' industrial camera have earned a high reputation in the machine vision industry. With support for Camera Link and CoaXPress interfaces, VN Series provides FFC (Flat Field Correction) and PDC (Pixel Defect Correction) machine vision operations. For more information on the VN Series, click on the datasheet below.

Pixel Shifting Camera with Thermoelectric Cooling Technology

By using pixel shift technology and thermoelectric cooling technology, VNP Series delivers the best performance especially for machine vision applications that require extremely high resolution and high image quality such as FPD inspection. For more information on the VNP Series, click on the datasheet below.

High Performance Cameras with Thermoelectric Cooling Technology

By lowering the sensor temperature up to 21 degrees Celsius below ambient temperature, the VP Series provides an easy solution to machine vision applications where stable performance and low noise are essential, even over long exposure times. Robust, versatile, and designed for excellent heat dissipation, the VP series ensures crystal clear imaging by preventing hazy images caused by interior/exterior temperature difference. For more information on the VP Series, click on the datasheet below.

Ultra-compact & Cost-effective CMOS Cameras

VQ Series is the smallest camera in the Vieworks range, and is therefore uniquely ideal for a wide range of machine vision applications. With its compact housing size and light weight, VQ Series can easily be integrated into most industrial camera systems. PoE Gigabit Ethernet interface also contributes to easy system integration, with fewer cable lengths and multiple camera settings. It is a cost-effective solution because expensive frame grabbers and cables are not required for Gigabit Ethernet. For more information on the VQ Series, click on the datasheet below.

Rugged Aerial Imaging/Surveillance Cameras

The VX Series from Vieworks is, in a word, robust. These cameras undergo strict reliability tests such as 10G vibration test and 70G shock tests, and can operate at temperatures between -50°C C and 81°C, which means they're perfect for outdoor machine vision applications. Using functions such as auto exposure, autofocus and auto gain make it very easy to control the camera outdoors. The VX supports the widely-used Gigabit Ethernet interface and provides FFC (Flat Field Correction), PDC (Pixel Defect Correction), and anti-smear image processing. For more information on the VX Series, click on the datasheet below.

-

The VS-2MU is a 2-megapixel resolution scientific-CMOS (sCMOS) camera with the USB 3.0 interface. This camera uses the sCMOS image sensor (GSENSE2011e) technology from Gpixel and offers up to 79.4 frames per second at 2048 Χ 1150 resolution. Its high sensitivity featured with low noise and high quantum efficiency makes the VS-2MU camera ideal for biometry, medical and scientific applications. For more information on the VS Series, click on the datasheet below.